Radon cannot be seen, smelled or tasted. Testing is the only way to determine the radon level inside a particular home. Idaho Elite Inspection Team provides professional radon testing for homebuyers, sellers and homeowners in Idaho Falls, Pocatello, Rexburg, Rigby, Blackfoot and surrounding Eastern Idaho communities.
Radon testing can be scheduled as part of a home inspection or as a separate service. After the test is completed, you receive property-specific results that can help you understand whether additional evaluation or mitigation should be considered.
Call (208) 268-8350, text (208) 268-3499, or schedule your radon test online.
What Is Radon?
Radon is a naturally occurring radioactive gas produced by the breakdown of uranium in soil and rock. It can move through the ground and enter a home through openings around foundations, floor slabs, utility penetrations and other construction joints.
Because radon is invisible and odorless, a home can have an elevated level without any noticeable indication. Radon has been identified by the EPA as the leading cause of lung cancer among people who do not smoke and the second-leading cause of lung cancer overall.
Radon can be present in:
- New and older homes
- Homes with basements
- Homes with crawl spaces
- Slab-on-grade homes
- Well-sealed homes
- Homes with natural ventilation
- Rural and urban properties
A neighboring home’s result cannot determine the level in your home. Radon concentrations can vary considerably between properties, even within the same neighborhood.
Why Radon Testing Matters in Idaho
Radon deserves particular attention in Idaho because the Idaho Department of Health and Welfare reports that two out of five Idaho homes have elevated radon levels.
The department explains that radon levels vary by location and that testing is the only way to know a home’s result. It recommends mitigation when the result is above the EPA guideline of 4.0 picocuries per liter, commonly written as 4.0 pCi/L.
The EPA recommends taking steps to reduce radon when a home measures 4.0 pCi/L or higher. It also recommends considering reduction when results fall between 2.0 and 4.0 pCi/L, because there is no known completely risk-free level of radon exposure.
Testing provides information about the individual property rather than relying on statewide maps, neighborhood averages or results from nearby homes.
Radon Testing in Idaho Falls, ID
Idaho Elite Inspection Team provides radon testing for buyers, sellers and homeowners throughout Idaho Falls and nearby Bonneville County communities.
A radon test can be added when purchasing an established home, evaluating new construction, preparing a property for sale or obtaining updated information about a current residence.
Homes of every age and foundation style can contain radon. Testing the individual property provides more useful information than assuming the result based on the home’s age, neighborhood or construction type.
Buyers can combine radon measurement with a complete home inspection in Idaho Falls, ID.
Radon Testing in Pocatello, ID
Radon testing is available for properties throughout Pocatello and the surrounding Bannock County area.
Testing may be scheduled during a residential purchase, before listing a home, after moving into a property or when an earlier radon result is no longer available. Homes with basements, crawl spaces or slab foundations can all be tested.
Because radon levels are property-specific, a result from another home in Pocatello does not establish the level inside the property being evaluated.
Learn more about scheduling a home inspection in Pocatello, ID with optional radon testing.
Radon Testing in Rexburg, ID
Homebuyers and homeowners in Rexburg can schedule radon testing for new construction, established homes and rental or investment properties.
A newly constructed home should not be assumed to have a low radon level. Construction materials, foundation design and radon-resistant features do not replace property-specific testing.
When the test accompanies a home inspection, clients can review the radon result alongside information about the property’s other visible and accessible systems.
Add radon testing when scheduling your Rexburg home inspection.
Radon Testing in Rigby, ID
Idaho Elite Inspection Team serves buyers, sellers and property owners in Rigby and surrounding Jefferson County communities.
Radon testing can be useful for homes within town as well as properties in surrounding residential and rural areas. The property’s location alone cannot determine its indoor radon concentration.
Testing provides a measurable result that homeowners and real estate clients can use when considering their next steps.
Explore our complete home inspection services in Rigby, Idaho.
Radon Testing in Blackfoot, ID
Professional radon testing is also available for properties in Blackfoot and nearby Bingham County communities.
Buyers may add testing during the inspection period, while sellers may choose to test before listing. Existing homeowners can schedule a standalone test when the property has not previously been evaluated or when updated results are needed.
A test provides information about the actual home rather than relying on assumptions about the area or a neighboring property.
Schedule radon testing with a complete Blackfoot home inspection.
What to Expect From Professional Radon Testing
1. Schedule the Test
Provide the property address, preferred appointment date and information about whether the radon test will accompany a home inspection.
Testing is available for homebuyers, sellers and homeowners throughout Idaho Falls and the surrounding Eastern Idaho service area.
2. Receive Preparation Instructions
Certain property conditions may need to be maintained before and during testing. Idaho Elite Inspection Team will explain any applicable instructions so the testing environment can remain consistent.
Doors and windows should not be unnecessarily opened during the testing period, but normal entry and exit can continue according to the instructions provided.
3. Testing Equipment Is Positioned
Testing equipment is placed in an appropriate area of the home based on the property layout and applicable measurement procedures.
The testing location is generally selected to represent a lower area that is currently occupied or could be used as living space.
4. The Test Runs for the Required Period
The device remains in place for the appropriate measurement period. It should not be moved, covered, unplugged or disturbed during testing.
5. Review the Results
After the measurement period is complete, the results are reviewed and provided to the client.
The result is expressed in picocuries per liter. The report helps you compare the property’s measurement with EPA guidance and determine whether additional testing or consultation with a qualified radon mitigation professional should be considered.
Idaho Elite Inspection Team performs radon measurement and inspection services. When mitigation is recommended, clients should consult an appropriately qualified radon mitigation contractor.
Can Radon Testing Be Added to a Home Inspection?
Yes. Radon testing can be scheduled with a buyer inspection, pre-listing inspection, new-construction inspection or other eligible residential inspection service.
Combining the appointments can make the testing process easier to coordinate during a real estate transaction. Radon testing is also available separately for homeowners who do not currently need a complete home inspection.
Customers who want a broader inspection can review the Elite Inspection Package, which combines multiple property-evaluation services in one appointment.
Understanding Your Radon Test Result
Radon results are reported in picocuries per liter, abbreviated as pCi/L.
Result Below 2.0 pCi/L
The result is below the level at which the EPA commonly recommends considering mitigation. Homeowners may still choose to retest in the future, particularly after major renovations or changes in how lower levels are used.
Result Between 2.0 and 4.0 pCi/L
The EPA recommends considering steps to reduce radon within this range. A qualified radon professional can explain available mitigation options based on the property.
Result of 4.0 pCi/L or Higher
The EPA recommends that the home be mitigated when the radon result is 4.0 pCi/L or higher. A qualified mitigation contractor can design and install an appropriate reduction system.
Radon testing does not pass or fail a home. It provides a measurement that can be used to make an informed decision.
Our Services:
EPA Radon Resources for Buyers and Sellers
The EPA’s Home Buyer’s and Seller’s Guide to Radon answers common questions about testing, radon results and mitigation during a real estate transaction. The most recent guide listed by the EPA was revised in March 2024.
Here is a helpful link for a pdf copy of the Environmental Protection Agency’s (EPA) Home Buyer’s and Seller’s Guide to Radon.
Why take a chance with your family’s health. Give yourself peace of mind Call (208) 268-8350 or text (208) 268-3499 Today or Click To Schedule Online 24/7 Right From Our Website for more information.
Frequently Asked Questions About Radon Testing
What is radon?
Radon is a naturally occurring radioactive gas produced by the breakdown of uranium in soil and rock. It can enter buildings through openings in and around the foundation.
Can I see or smell radon?
No. Radon cannot be seen, smelled or tasted. Testing is the only way to determine the radon level in a particular home.
Do Idaho homes have elevated radon levels?
Yes. The Idaho Department of Health and Welfare reports that two out of five Idaho homes have elevated radon levels. Results can vary between properties, so each home should be evaluated individually.
What radon level does the EPA recommend addressing?
The EPA recommends mitigation when a home’s radon level is 4.0 pCi/L or higher. It also recommends considering reduction when the result is between 2.0 and 4.0 pCi/L.
Can a newly built home have radon?
Yes. New and older homes can have elevated radon. The presence of radon-resistant construction features does not replace testing after the home is completed.
Should buyers test a home for radon?
The EPA recommends that buyers and sellers have a home tested. Testing should be scheduled early enough in the transaction to allow the parties to review the result.
Can radon testing be added to my home inspection?
Yes. Radon testing can be added to an eligible home inspection or scheduled as a separate service.
Where does Idaho Elite Inspection Team provide radon testing?
Radon testing is available in Idaho Falls, Pocatello, Rexburg, Rigby, Blackfoot and surrounding Eastern Idaho communities.
Schedule Radon Testing in Eastern Idaho
Get property-specific information about the radon level inside your home.
Idaho Elite Inspection Team provides radon testing for buyers, sellers and homeowners in Idaho Falls, Pocatello, Rexburg, Rigby, Blackfoot and surrounding communities.
Call (208) 268-8350 or text (208) 268-3499 Today or Click To Schedule Online.
